签到最新话题最热话题

懒虫工控(旧)

 找回密码
 立即注册

QQ登录

只需一步,快速开始

扫一扫,访问微社区

查看: 3196|回复: 2

[已解答] 气相色谱仪资料

[复制链接] |关注本帖

签到天数: 75 天

连续签到: 1 天

[LV.6]虫坛居民III

发表于 2016-11-7 17:05:11 | 显示全部楼层 |阅读模式
这个是横河气相色谱仪中的一段话:
The process gas chromatograph consists of a sampling mechanism, a column and a detector.
Sampling is carried out by switching a sampling valve. When separating components or detecting concentrations, the sampling valve is set to allow the gas (liquid) to be measured to flow through the sample column. When sampling, the sampling valve leads the gas (liquid) to be measured to a column on a carrier gas. (See Figure1.1)
There are two important points regarding sampling: a regular volume is sampled since repeated sampling is required; and samples are taken quickly and securely. The volume is fixed by measuring a specific gas (liquid) of controlled temperature and pressure using a sample measurement tube. Samples are taken quickly and securely by ensuring that the gas to be measured always flows without interrupt.


ps:大家来看看,怎么翻译呢

回复

使用道具 举报

签到天数: 137 天

连续签到: 1 天

[LV.7]以坛为家I

发表于 2016-11-7 19:04:27 | 显示全部楼层
The process gas chromatograph consists of a sampling mechanism, a column and a detector.
过程气相色谱仪由取样机构,柱和检测器组成。
Sampling is carried out by switching a sampling valve. When separating components or detecting concentrations, the sampling valve is set to allow the gas (liquid) to be measured to flow through the sample column. When sampling, the sampling valve leads the gas (liquid) to be measured to a column on a carrier gas. (See Figure1.1)
通过切换采样阀进行采样。当分离组分或检测浓度时,设置采样阀以允许测量气体(液体)流过样品柱。当采样时,采样阀将待测量的气体(液体)引导到载气上的柱。 (见图1.1)
There are two important points regarding sampling: a regular volume is sampled since repeated sampling is required; and samples are taken quickly and securely. The volume is fixed by measuring a specific gas (liquid) of controlled temperature and pressure using a sample measurement tube. Samples are taken quickly and securely by ensuring that the gas to be measured always flows without interrupt.
关于采样有两个重要的点:定期体积被采样,因为需要重复采样; 并快速和安全地取样。 通过使用样品测量管测量受控温度和压力的特定气体(液体)来固定体积。通过确保待测量的气体总是不中断地流动,快速且安全地取样。

评分

参与人数 2魅力 +1 +6 收起 理由
王天泽 + 1 热心助人!
gubai0348 + 6 热心助人!

查看全部评分

回复 支持 反对

使用道具 举报

签到天数: 49 天

连续签到: 1 天

[LV.5]虫坛居民II

发表于 2016-11-7 20:04:03 | 显示全部楼层
这是舞长安的翻译,我只是对其中几个 按自己的理解进行下修正
1、过程气相色谱仪由取样机构,柱和检测器组成。
2、通过切换开关)采样阀进行采样。当分离组分或检测浓度时,设置开启)采样阀以允许测量气体(液体)流过样品柱。采样时,采样阀将待测量的气体(液体)引导到载气上的柱。 (见图1.1)

3、关于采样有两个重要的点(要注意)定期体积被采样,因为需要重复采样因为需要重复采样,请取相同体积); 快速和安全(准确)地取样。 通过使用样品测量管测量温度和压力受控的(确定组分的)气体(液体)来固定体积。通过确保待测量的气体总是不中断地(持续)流动,(来实现取样)快速且安全(准确地取样


整理后为

1、过程气相色谱仪由取样机构,柱和检测器组成。
2、通过开关采样阀进行采样。当分离组分或检测浓度时,开启采样阀以允许待测量气体(液体)流过样品柱。采样时,采样阀通过
载气待测气体(液体)引导到柱上。 (见图1.1)
3、关于采样有两点要注意:因为需要重复采样,需取相同体积; 快速和准确地取样。 通过
控制温度和压力使确定组分的气体(液体)流过样品测量管来保证采样体积不变。通过确保待测量的气体持续流动,来实现取样快速准确。

气相色谱仪的样品分析机构由采样机构、色谱柱和检测器三部分组成。
待分析的样品用采样阀进行采集,采样阀有采样和分离及检测两种工作状态。在分离及检测状态时,取样阀应能让需要测量的气体(液体)流过采样阀的定量管。采样状态时,载气将采样阀定量管中需测量的气体(液体)样品带入色谱柱中(见下图)。
关于采样有两点需注意:因为需要重复采样,所以采样的体积应固定不变。此外,采样必须迅速可靠。实际测量中,使用—根温度和压力固定且定体积的的样品定量管来保证采集的某一气体(液体)的体积不变。使采样迅速而可靠的方法是待测量的气体始终不停地流通。



评分

参与人数 1魅力 +1 收起 理由
王天泽 + 1 热心助人!

查看全部评分

回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

回帖奖励

[详情]

  • * 每天自己主题被回复3次可获得额外3虫币奖励。
  • * 每天回复他人主题5次可获得额外10虫币的奖励。
  • * 奖励每天都可领取,一定要多参与论坛讨论哦。
  • * 同一主题的重复回复不计。
  • 
    关闭

    站长推荐上一条 /1 下一条

    QQ|手机版|小黑屋|懒虫工控(旧) ( 陕ICP备2020013210号-1 )|网站地图  

    GMT+8, 2024-3-29 08:34 , Processed in 0.064110 second(s), 34 queries .

    Powered by 懒虫工控

    © 2016-2020 LCGK

    快速回复 返回顶部 返回列表