签到最新话题最热话题

懒虫工控(旧)

 找回密码
 立即注册

QQ登录

只需一步,快速开始

扫一扫,访问微社区

查看: 4113|回复: 0
打印 上一主题 下一主题

[讨论] FS中我们会遇见的术语及含义

[复制链接] |关注本帖

签到天数: 392 天

连续签到: 2 天

[LV.9]以坛为家III

跳转到指定楼层
楼主
发表于 2018-1-26 18:36:17 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
CCF, Common Cause Failure(共因失效)
A situation where several subsystems fail due to a single event. All failures are caused by the event itself and are not consequences of each other.
DC, Diagnostic Coverage(诊断覆盖率)
Describes the effectiveness of fault monitoring of a system or subsystem. It is the ratio (0100%) between the failure rate of detected dangerous failures and the failure rate of total dangerous failures.
E/E/PES(电气/电子/可编程电子系统)
Electric/Electronic/Programmable Electronic Systems
FMEA, Failure mode and effect analysis(失效模式和后果分析)
Is a systematic technique for failure analysis. A FMEA is often the first step of a system reliability study. It involves reviewing as many components, assemblies, and subsystems as possible to identify failure modes, and their causes and effects. For each component, the failure modes and their resulting effects on the rest of the system are recorded in a specific FMEA worksheet. A FMEA is used to structure mitigation for risk reduction based on either failure (mode) effect severity reduction or based on lowering the probability of failure or both.
FS, Functional Safety(功能安全)
Functional Safety is part of the overall safety that depends on a system or equipment operating correctly in response to its inputs.
Safety function(安全功能)
A function designed for adding safety to a machine whose failure can result in an immediate increase in risk(s).
MTTFd, Mean Time To dangerous Failure(平均危险失效时间)
Expectation of the average time for a dangerous failure to occur.
PFHd, Probability of dangerous Failure per Hour(每小时危险故障概率)
Average probability of dangerous failure taking place during one (1) hour. PFHd is the value that is used for determining the SIL or PL value of a safety function.
PL, Performance Level(性能等级)
Levels (a, b, c, d, e) for specifying the capability of a safety system to perform a safety function under foreseeable conditions.
Safety(安全)
This is freedom from unacceptable risk of physical injury or of damage to the health of people, either directly or indirectly as a result of damage to property or to the environment.
SIL, Safety Integrity Level(安全完整性等级)
Levels (1, 2, 3, 4) for specifying the capability of an electrical safety system to perform a safety function under foreseeable conditions. Only levels 1-3 are used in machinery.
SILCL, SIL Claim Limit(安全完整性要求限制)
Maximum Safety Integrity Level (SIL) that can be claimed for an electrical safety system, taking account of architectural constraints and systematic safety integrity.
Subsystem(子系统)
A component of a safety function that has its own safety level (SIL/PL) that affects the safety level of the whole safety function. If any of the subsystems fail, the whole safety function fails.



分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友 微信微信
收藏收藏 转播转播 分享分享 分享淘帖 支持支持 反对反对
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

回帖奖励

[详情]

  • * 每天自己主题被回复3次可获得额外3虫币奖励。
  • * 每天回复他人主题5次可获得额外10虫币的奖励。
  • * 奖励每天都可领取,一定要多参与论坛讨论哦。
  • * 同一主题的重复回复不计。
  • 
    关闭

    站长推荐上一条 /1 下一条

    QQ|手机版|小黑屋|懒虫工控(旧) ( 陕ICP备2020013210号-1 )|网站地图  

    GMT+8, 2024-12-22 19:52 , Processed in 0.072825 second(s), 34 queries .

    Powered by 懒虫工控

    © 2016-2020 LCGK

    快速回复 返回顶部 返回列表